Newton Meter Calculator (2024)

Last updated:

Table of contents

What is a newton meter?Newton meter calculatorNewton meter conversionNewton meter and torqueFAQs

Our newton meter calculator is here to help you convert from a newton meter to a list of other torque-measuring units.

You might never have thought of needing a calculator to assist you in converting a newton meter to a foot-pound. But you would have wondered, is a newton meter a joule? Or how much does 1 newton meter equal? You are at the right place, no matter how big or small your question is.

So, let's start by talking about what a is newton meter.

What is a newton meter?

Newton meter is a unit that measures torque and work/energy.

Torque is the turning effect of force. In other words, it is a force that can cause an object to rotate. For instance, you were tightening a nut using a wrench. The motion would be rotational. And we would say the torque was 'x' newton meter (x being any number).

It would be good to remember that 1 newton meter equals the force of 1 newton applied to a moment arm of 1 meter.

We have a work and power calculator that you may wanna check out to get to know more about work and the units that measure it.

Newton meter calculator

The newton meter calculator is one of the simplest tools of its kind. It is effortless to use and has a list of unit options to choose from.

Newton meter is the unit of torque, but so is the foot-pound force, and many others. This means you have a long list of units you can convert from by using the newton meter as your base conversion.

So to use our tool, you must start by entering your amount in the unit of your choice. And then, in the second field, you have the result converted in the unit you chose to convert it to.

For instance, you want to convert 7 N·m to dyn cm. The first field has a default unit of N·m, and you enter 7. In the second field, change the unit to dyne centimeter, and you have your result: 70,000,000 dyn cm.

But the best part is that the tool works in reverse as well. If you want to convert from 5 ton-foot meter to a newton meter, the tool will determine the result of 49,020 N·m.

Newton meter conversion

The newton meter conversion is easy, straightforward, and much-needed. We understand not all calculations use the same units of measurement and require different units in situations. This is why we have created the newton meter calculator to help you convert from newton meter to ft-lbs (foot-pound force), or kN·m (kilonewton meter), and much more.

The list of units we provide to convert from is as follows:

  • Kilonewton meter;
  • Millionewton meter;
  • Micronewton meter;
  • Foot-pound force;
  • Dyne centimeter;
  • Kilogram-force meter;
  • Ton-force meter; and
  • Poundal foot.

Newton meter and torque

Imagine force applied on an object. Now imagine the object rotates due to that force. This is torque. Simple yet so significant.

If you want to know more about it, you may want to check out our torque calculator.

Torque is also measured in joules on occasion as the newton-meter is equivalent to joules, the SI unit of work. Since they are equal to each other, one can be converted into the other. And if that is something of interest to you, it is highly recommended to try out Omni's nm to joules calculator.

FAQs

Can we measure torque in newton meter?

Yes, we can. Newton meter is the SI unit of torque.

Torque is the force that rotates an object. It involves force, its unit is the newton, and the distance the object is moved, and the unit is the meter. So, combining them both, the newton meter becomes the unit to measure torque.

How much is 2.4 foot-pounds in newton meter?

2.4 foot-pounds (ft·lbs) equals 3.254 newton meters (N·m).

The conversion is straightforward, and all you have to remember is that:

1 ft·lbf = 1.3558 N·m

So, to convert from foot-pound force to newton meters

  1. Note the amount in foot-pounds.
  2. Multiply it by 1.3558.
  3. The result is the quantity in the newton meters.

Is a newton meter a joule?

Yes, a newton meter is equal to a joule. Joule is the SI unit of work and energy.

One joule of work occurs when a force of one newton displaces an object through a distance of one meter.

How can I convert Nm to poundal force?

The conversion from newton meter (N·m) to poundal force (pdl·ft) is simple and requires one small step. But before that, you need to know that 1 N·m = 23.2 poundal force.

So, all you have to do is:

  1. Multiply your amount in newton meters by 23.2; and
  2. You have your result in poundal force.

It couldn't get any easier.

Newton Meter Calculator (2024)

FAQs

How to calculate newton metres? ›

Multiply the number of newtons and the distance the object was lifted to get the unit of work, which is called a newton-meter (N-m). 5. One newton-meter is equal to one joule (unit of measure for energy or work).

How to estimate newton meter? ›

2.4 foot-pounds (ft·lbs) equals 3.254 newton meters (N·m). Note the amount in foot-pounds. Multiply it by 1.3558. The result is the quantity in the newton meters.

How much force is 1 newton meter? ›

0.73756215 lbf.ft

How do you calculate Nm? ›

Calculating nanometers from wavenumber

To convert from wavenumber (cm-1) to nanometers, use the following equation: 1/cm-1 x 107 = nanometers. Or to convert from nanometers to wavenumber, you simply reverse the equation so that wavenumber (cm-1) = 107 / wavelength in nanometers. Or use the tool below.

What is Newton meter for dummies? ›

Just as scales measure weight and tape measures show length, a Newton meter's purpose is to measure force. It is also known to many as a spring scale or spring balance. Specifically, spring scales measure the force acting on an object, the unit of which is the Newton.

How much torque is 1 Nm? ›

How is torque measured? Torque is usually measured in Newton metres (Nm) or you might see the imperial measurement of lb-ft (pounds-feet), although this unit of measurement is pretty outdated by now. If you want to calculate the conversion for yourself, 1 Nm is equivalent to 0.738 lb/ft.

How heavy is 1 Nm? ›

So, when F is 1 Newton and r is 1 meter, you get 1 Nm of torque. This is equivalent to 8.85 lbs/inch or 0.73 lbs/ft - the kind of torque you might use on a small screw.

What is a newton metre equal to? ›

The newton meter is a measurement of torque. One newton meter is equal to approximately 0.738 pound-feet. It's easy to confuse the newton meter with newton times a meter, which is a joule and a unit of energy.

How is a newton calculated? ›

Thus, a single newton is the amount of force required to accelerate 1 kilogram of mass 1 meter per second squared in a specific vector of direction. The formula for force is written as: 1N = 1kg (m/s/s).

How much is 20 nm in torque? ›

How to convert newton-meters to foot-pounds?
Newton-metersFoot-pounds
20 Nm14.751 ft-lbs
25 Nm18.439 ft-lbs
30 Nm22.127 ft-lbs
35 Nm25.815 ft-lbs
7 more rows

How many newtons can a human push? ›

What I recall from my experience at various construction sites , normal human effort is considered to be maximum 40 kg which is equivalent to 400 N. Lifting tools like chain pulley blocks , winches are designed accordingly. On the extreme end, a professional sumo wrestler can give a push equivalent to 4000-5000 N.

How to find Newton meter? ›

If you need to measure the amount of energy needed to rotate an object from a pivot point, then you are applying torque. One Newton meter is equal to the amount of torque needed to move an object a distance of 1 meter from the pivot at a right angle to the radius.

How is Nm calculated? ›

The formula for torque, the law of the lever is: torque = force (N) x lever arm (m). The units for torque are newton-meters (Nm) or pound-feet (lb-ft). Newton (or pound) stands for the force that is acting, while meters (or feet) stand for the length of the lever arm.

How many psi are in a Newton? ›

Newton/square Meter to Psi Conversion Table
Newton/square MeterPsi [psi]
0.01 newton/square meter1.4503773773E-6 psi
0.1 newton/square meter1.45038E-5 psi
1 newton/square meter0.0001450377 psi
2 newton/square meter0.0002900755 psi
7 more rows

How are newton meters measured? ›

We can measure force using a newton meter. The newton meter works by stretching a spring. As the mass being measured increases, the force downwards, due to gravity increases, stretching the spring further.

What is a newton-metre equal to? ›

The newton meter is a measurement of torque. One newton meter is equal to approximately 0.738 pound-feet. It's easy to confuse the newton meter with newton times a meter, which is a joule and a unit of energy.

What is the value of 1 newton-metre? ›

One newton is equal to 1 kilogram meter per second squared. In plain English, 1 newton of force is the force required to accelerate an object with a mass of 1 kilogram 1 meter per second per second. It is equal to 0.224808943099710 pounds, or 7.23301385120989 poundals.

References

Top Articles
Latest Posts
Article information

Author: Sen. Ignacio Ratke

Last Updated:

Views: 6014

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Sen. Ignacio Ratke

Birthday: 1999-05-27

Address: Apt. 171 8116 Bailey Via, Roberthaven, GA 58289

Phone: +2585395768220

Job: Lead Liaison

Hobby: Lockpicking, LARPing, Lego building, Lapidary, Macrame, Book restoration, Bodybuilding

Introduction: My name is Sen. Ignacio Ratke, I am a adventurous, zealous, outstanding, agreeable, precious, excited, gifted person who loves writing and wants to share my knowledge and understanding with you.